Our label adhesives are long-lasting and approved for direct contact with dry, moist and fatty foods. All labels have a high resistance to light, heat and ageing. For more information, click any adhesive type listed below.
Removable adhesive
Medium tack with a low/removable level of adhesion
Well suited for labelling cardboard, PE-Films and steel. Removability may decrease if applied to certain surface-coated materials
For adhesion to work, the label must be applied at a temperature no lower than -25°C (the temperature minimum)
Once applied, the label performs between a range of -40° and 60°C (or 200° for short periods)
Four-year shelf life at 20°C
Permanent adhesive
High tack with a high level of adhesion
Perfect for high-quality industrial labels
For adhesion to work, the label must be applied at a temperature no lower than 0°C (the temperature minimum)
Once applied, the label performs between a range of -20° and 80°C (or 200° for short periods)
Well suited for labelling rough but not extremely curved surfaces
Four-year shelf life at 20°C
Extra permanent adhesive
Very high tack with a very high level of adhesion
Maintains very high tack even on cold surfaces down to -10 °C
For adhesion to work, the label must be applied at a temperature no lower than -10°C (the temperature minimum)
Once applied, the label performs between a range of -30° and 80°C (or 200° for short periods)
Well suited for labelling smooth or textured (polar or non-polar) surfaces such as plastic containers, film wrappings and other materials
Highly waterproof once applied to a surface
Four-year shelf life at 20°C
Tamper-evident adhesive
Very high tack with a very high level of adhesion
For adhesion to work, the label must be applied at a temperature no lower than 0°C (the temperature minimum)
Once applied, the label performs between a range of -40° and 60°C
Adhesive is tacky at room temperature
Adheres very well to non-polar surfaces, such as HDPE, LDPE and waxy corrugated
Works very well in applications with high moisture or high condensation
Limited environmental impact
Two-year shelf life at 20°C
Want to know more about our labelling materials?
Semi-gloss paper
Suitable for high-quality labels with a multi colour imprint
Offers an excellent quality of imprint with all conventional printing methods as well as with thermal transfer printing and laser
Some initial resistance to grease, but less so compared to non-paper materials
Grammage: approx. 77 g/m²
Caliper: approx. 65 μm
Opacity: approx. 87%
Medium water resistance
White polypropylene
Perfect for the production of optically demanding, glossy, non-transparent labels
Preferably used on polypropylene surfaces
Pearly look of the film adds an exquisite touch to the labels
Well suited for labelling cosmetic products, cleaning agents and applications demanding resistance to chemicals or weather
Grammage: approx. 44 g/m²
Caliper: approx. 58 μm
Opacity: approx. 85%
High water resistance
DateCodeGenie® paper
Bespoke thermal label material specially designed to work with your DateCodeGenie® machine
Tamper-evident paper
Designed for general purpose high-quality, multi colour printed labels
Works well for packaged food and homecare applications in chill and ambient conditions
Suitable for logistics labelling in case the end-user is looking for mid-gloss appearance